External Inline CO2 reactor

Why buy when you can DIY?
Post Reply
User avatar
Jamie G
Posts: 443
Joined: Mon Dec 29, 2003 6:49 pm
Location: Crofton, MD
Contact:
Contact Jamie G

Post by Jamie G »

maybe i was dreaming of my 500 gal at the time <img border="0" src="smileys/smiley36.gif" border="0">
ok, so is the 10" long end to end with the caps, or 10" just the pipe, then add the caps ?
Top
User avatar
Jamie G
Posts: 443
Joined: Mon Dec 29, 2003 6:49 pm
Location: Crofton, MD
Contact:
Contact Jamie G

Post by Jamie G »

i double checked the reactor and i used 2" PVC the whole unit is approx 14" with endcaps .. should i make a new one and make it half the size, or should i make a 1" dia. one and cram plastic scrub brushes in it ?
Top
User avatar
Jamie G
Posts: 443
Joined: Mon Dec 29, 2003 6:49 pm
Location: Crofton, MD
Contact:
Contact Jamie G

Post by Jamie G »

i built a new unit last night .. used 1 1/4" about 10 inches long and stuck scrub brushes cut in half inside and sealed it up. I should have but couldnt check in it this am b/c of an emergency at work .. i was awake untill 3 am then back on the road to the office at 6 .. thank goodness for coffee   <img border="0" src="smileys/smiley36.gif" border="0">
Top
Post Reply

Return to “DIY”

Sponsors